D-Link X-STACK DES-3200 SERIES - Show Authentication

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
140
Format
config authentication server failover [local | permit | block]
Parameters
local - Use local DB to authenticate the client.
permit - The client is always regarded as authenticated.
block - Block the client (Default setting).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Set authentication server auth fail over state:
DES-3200-28P:admin#config authentication server failover local
Command: config authentication server failover local
Success.
DES-3200-28P:admin#
14-5 show authentication
Description
This command is used to display authentication global configuration.
Format
show authentication
Parameters
None.
Restrictions
None.
Example
To show authentication global configuration: