D-Link X-STACK DES-3200 SERIES - Show Snmp Community

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
534
Parameters
community - Community string will be deleted.
<community_string 32> - Enter the community string value here. This value can be up to 32
characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a SNMP community “System”:
DES-3200-28P:admin#delete snmp community System
Command: delete snmp community System
Success.
DES-3200-28P:admin#
63-3 show snmp community
Description
This command is used to display the community string configurations.
Format
show snmp community <community_string 32>
Parameters
<community_string 32> - (Optional) Specify the Community string.
If not specify community string , all community string information will be displayed.
Restrictions
None.
Example
To display SNMP community: