D-Link X-STACK DES-3200 SERIES - Show Rmon

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
555
Format
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]} (1)
Parameters
rising_alarm - (Optional) Specify the trap state for rising alarm. The default state is enabled.
enable - Specify that the rising alarm function will be enabled.
disable - Specify that the rising alarm function will be disabled.
falling_alarm - (Optional) Specify the trap state for falling alarm. The default state is enabled.
enable - Specify that the falling alarm function will be enabled.
disable - Specify that the falling alarm function will be disabled.
Restrictions
Only Administrator level can issue this command.
Example
To configure the trap state for RMON events:
DES-3200-28P:admin#config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
DES-3200-28P:admin#
63-34 show rmon
Description
This command is used to display the RMON related setting.
Format
show rmon
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the RMON related setting: