D-Link X-STACK DES-3200 SERIES - Config Mac_Based_Access_Control Log State [Enable | Disable]; Config Mac_Based_Access_Control Trap State [Enable | Disable]

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
388
40-18 config mac_based_access_control trap state
Description
This command is used to enable or disable sending of MAC-based Access Control traps.
Format
config mac_based_access_control trap state [enable | disable]
Parameters
enable - Enable trap for MAC-based Access Control. The trap of MAC-based Access Control will
be sent out.
disable - Disable trap for MAC-based Access Control.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable trap state of MAC-based Access Control:
DES-3200-28P:admin#config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DES-3200-28P:admin#
40-19 config mac_based_access_control log state
Description
This command is used to enable or disable generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
enable - Enable log for MAC-based Access Control. The log of MAC-based Access Control will
be generated.
disable - Disable log for MAC-based Access Control.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.