D-Link X-STACK DES-3200 SERIES - Chapter 14 Compound Authentication Command List

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
138
Chapter 14 Compound Authentication
Command List
enable authorization attributes
disable authorization attributes
show authorization
config authentication server failover [local | permit | block]
show authentication
14-1 enable authorization
Description
This command is used to enable authorization.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
This example sets authorization global state enabled:
DES-3200-28P:admin#enable authorization attributes
Command: enable authorization attributes
Success.
DES-3200-28P:admin#
14-2 disable authorization
Description
This command is used to disable authorization.
Format
disable authorization attributes