D-Link X-STACK DES-3200 SERIES - Show Accounting Service

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
60
Example
Enable it to configure accounting shell state:
DES-3200-28P:admin#config accounting service shell state enable
Command: config accounting service shell state enable
Success.
DES-3200-28P:admin#
4-31 show accounting service
Description
This command is used to show the status of RADIUS accounting services.
Format
show accounting service
Parameters
None.
Restrictions
None.
Example
To show information of RADIUS accounting services:
DES-3200-28P:admin#show accounting service
Command: show accounting service
Accounting Service
-------------------
Network : Enabled
Shell : Enabled
System : Enabled
DES-3200-28P:admin#