D-Link X-STACK DES-3200 SERIES - Config 802.1 X Auth_Protocol [Local | Radius_Eap]; Show 802.1 X User

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
39
DES-3200-28P:admin#delete 802.1x user test
Command: delete 802.1x user test
Success.
DES-3200-28P:admin#
4-5 show 802.1x user
Description
This command is used to display the 802.1X user.
Format
show 802.1x user
Parameters
None.
Restrictions
None.
Example
To display the 802.1X user information:
DES-3200-28P:admin#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username Password
--------------- ---------------
test test
Total Entries:1
DES-3200-28P:admin#
4-6 config 802.1x auth_protocol
Description
This command is used to configure the 802.1X auth protocol.
Format
config 802.1x auth_protocol [local | radius_eap]