D-Link X-STACK DES-3200 SERIES - Chapter 62 Simple Mail Transfer Protocol (SMTP) Command List

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
527
Chapter 62 Simple Mail Transfer
Protocol (SMTP) Command
List
enable smtp
disable smtp
config smtp {server <ipaddr> | server_port <tcp_port_number 1-65535> | self_mail_addr
<mail_addr 64> | [add mail_receiver <mail_addr 64> | delete mail_receiver <index 1-8>]}(1)
show smtp
smtp send_testmsg
62-1 enable smtp
Description
This command is used to enable the SMTP status.
Format
enable smtp
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable SMTP status:
DES-3200-28P:admin#enable smtp
Command: enable smtp
Success.
DES-3200-28P:admin#
62-2 disable smtp
Description
This command is used to disable SMTP status.