D-Link X-STACK DES-3200 SERIES - Show Sntp

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
596
DES-3200-28P:admin#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-3200-28P:admin#
70-2 show sntp
Description
This command is used to display SNTP current time source and configuration.
Format
show sntp
Parameters
None.
Restrictions
None.
Example
To show SNTP:
DES-3200-28P:admin#show sntp
Command: show sntp
Current Time Scource : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 30 sec
DES-3200-28P:admin#
70-3 enable sntp
Description
This command is used to turn on SNTP support.
Format
enable sntp