D-Link X-STACK DES-3200 SERIES - Page 114

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
110
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable autoconfig:
DES-3200-28P:admin#disable autoconfig
Command: disable autoconfig
Success.
DES-3200-28P:admin#
9-3 show autoconfig
Description
This command is used to display if the auto-configuration is enabled or disabled.
Format
show autoconfig
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To show autoconfig status:
DES-3200-28P:admin#show autoconfig
Command: show autoconfig
Autoconfig State: Disabled
Timeout : 50 sec
DES-3200-28P:admin#