D-Link X-STACK DES-3200 SERIES - Page 160

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
156
16-9 delete cfm md
Description
This command is used to delete a previously created maintenance domain. All the MEPs and
maintenance associations created in the maintenance domain will be deleted automatically.
Format
delete cfm md [<string 22> | md_index <uint 1-4294967295>]
Parameters
<string 22> - Enter the maintenance domain name. This name can be up to 22 characters long.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
between 1 and 4294967295.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a CFM MD:
DES-3200-28P:admin#delete cfm md op_domain
Command: delete cfm md op_domain
Success.
DES-3200-28P:admin#
16-10 enable cfm
Description
This command is used to enable the CFM globally.
Format
enable cfm
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.