D-Link X-STACK DES-3200 SERIES - Page 17

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
13
DES-3200-28P:admin#logout
Command: logout
**********
* Logout *
**********
DES-3200-28P Fast Ethernet Switch
Command Line Interface
Firmware: Build 4.03.004
Copyright(C) 2012 D-Link Corporation. All rights reserved.
UserName:
2-8 ?
Description
This command is used to display the usage description for all commands or the specific one.
Format
?
Parameters
None.
Restrictions
None.
Example
To get “ping” command usage, descriptions:
DES-3200-28P:admin#? ping
Command: ? ping
Command: ping
Usage: <ipaddr> { times <value 1-255> | timeout <sec 1-99>}
Description: Used to test the connectivity between network devices.
DES-3200-28P:admin#
2-9 clear
Description
The command is used to clear screen.