D-Link X-STACK DES-3200 SERIES - Page 172

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
168
DES-3200-28P:admin#show cfm mipccm
Command: show cfm mipccm
MA VID MAC Address Port
---------- ---- ----------------- -----
opma 1 xx-xx-xx-xx-xx-xx 2
opma 1 xx-xx-xx-xx-xx-xx 3
Total: 2
DES-3200-28P:admin#
16-22 config cfm mp_ltr_all
Description
This command is used to enable or disable the "all MPs reply LTRs" function.
Format
config cfm mp_ltr_all [enable | disable]
Parameters
enable - Specify that the MP's reply to the LTR function will be set to all.
disable - Disable sending the all MPs replay LTRs function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the "all MPs reply LTRs" function:
DES-3200-28P:admin#config cfm mp_ltr_all enable
Command: config cfm mp_ltr_all enable
Success.
DES-3200-28P:admin#
16-23 show cfm mp_ltr_all
Description
This command is used to show the current configuration of the "all MPs reply LTRs" function.
Format
show cfm mp_ltr_all