D-Link X-STACK DES-3200 SERIES - Page 185

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
181
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable cpu_interface_filtering:
DES-3200-28P:admin#disable cpu_interface_filtering
Command: disable cpu_interface_filtering
Success.
DES-3200-28P:admin#
17-6 show cpu access_profile
Description
This command is used to display current access list table.
Format
show cpu access_profile {profile_id <value 1-5>}
Parameters
profile_id - (Optional) Specify the index of access list profile.
<value 1-5> - Enter the profile ID used here. This value must be between 1 and 5.
Restrictions
None.
Example
To display current cpu access list table:
DES-3200-28P:admin#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Total Unused Rule Entries : 500
Total Used Rule Entries : 0
================================================================================