D-Link X-STACK DES-3200 SERIES - Page 188

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
184
DES-3200-28P:admin#debug error_log dump
Command: debug error_log dump
**************************************************************************
# debug log: 1
# level: fatal
# clock: 10000ms
# time : 2009/03/11 13:00:00
====================== SOFTWARE FATAL ERROR =======================
Invalid mutex handle : 806D6480
Current TASK : bcmARL.0
------------------------- TASK STACKTRACE ------------------------
->802ACE98
->8018C814
->8028FF44
->8028352C
->801D703C
->8013B8A4
->802AE754
->802A5E0C
To clear the error log:
DES-3200-28P:admin#debug error_log clear
Command: debug error_log clear
Success.
DES-3200-28P:admin#
To upload the error log to TFTP server:
DES-3200-28P:admin#debug error_log upload_toTFTP 10.0.0.90 debug-log.txt
Command: debug error_log upload_toTFTP 10.0.0.90 debug-log.txt
Connecting to server................Done.
Upload error log ..................Done.
DES-3200-28P:admin#
18-2 debug buffer
Description
This command is used to show the debug buffer’s state, or dump, clear, or upload the debug buffer
to a TFTP server.