D-Link X-STACK DES-3200 SERIES - Page 231

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
227
24-4 config dos_prevention log
Description
This command is used to enable or disable dos prevention log state.
Format
config dos_prevention log [enable | disable]
Parameters
enable - Enable DoS prevetion log state.
disable - Disable DoS prevention log state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable DoS prevention log:
DES-3200-28P:admin#config dos_prevention log enable
Command: config dos_prevention log enable
Success.
DES-3200-28P:admin#