D-Link X-STACK DES-3200 SERIES - Page 238

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
234
DES-3200-28P:admin#config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Command: config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Success.
DES-3200-28P:admin#
To configure the ERPS timers for a specific R-APS VLAN:
DES-3200-28P:admin#config erps raps_vlan 4094 timer holdoff_time 100 guard_time
1000 wtr_time 10
Command: config erps raps_vlan 4094 timer holdoff_time 100 guard_time 1000
wtr_time 10
Success.
DES-3200-28P:admin#
To configure the ring state of the ERPS:
DES-3200-28P:admin#config erps raps_vlan 4094 state enable
Command: config erps raps_vlan 4094 state enable
Success.
DES-3200-28P:admin#
25-6 config erps log
Description
This command is used to configure the log state of ERPS events.
Format
config erps log [enable | disable]
Parameters
log - Specify to enable or disable the ERPS log state.
enable - Enter enable to enable the log state.
disable - Enter disable to disable the log state. The default value is disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the ERPS log state: