D-Link X-STACK DES-3200 SERIES - Page 260

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
256
related to the current directory.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To erase a file:
DES-3200-28P:admin#dir
Command: dir
Directory of /c:
Idx Info Attr Size Update Time Name
--- ------- ---- -------- ------------------- ----------------
1 CFG(b) -rw- 29661 2000/04/02 06:03:19 config2.cfg
2 CFG(*) -rw- 29661 2000/04/01 05:54:38 config.cfg
3 RUN(*) -rw- 4879040 2000/03/26 03:15:11 B019.had
4 d--- 0 2000/04/01 05:17:36 system
29618 KB total (24697 KB free)
(*) -with boot up info (b) -with backup info
DES-3200-28P:admin#erase config2.cfg
Command: erase config2.cfg
Success.
DES-3200-28P:admin#dir
Command: dir
Directory of /c:
Idx Info Attr Size Update Time Name
--- ------- ---- -------- ------------------- ----------------
1 CFG(*) -rw- 29661 2000/04/01 05:54:38 config.cfg
2 RUN(*) -rw- 4879040 2000/03/26 03:15:11 B019.had
3 d--- 0 2000/04/01 05:17:36 system
29618 KB total (24727 KB free)
(*) -with boot up info (b) -with backup info
DES-3200-28P:admin#
28-9 move
Description
This command is used to move a file around the file system. Note that when a file is moved, it can
be specified whether to rename at the same time.