D-Link X-STACK DES-3200 SERIES - Page 279

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
275
Format
config igmp_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>
[add | delete] <portlist>
Parameters
vlan - Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Specify the multicast group IP address (for Layer 3 switch).
add - Specify to add the member ports.
delete - Specify to delete the member ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To unset port range 9-10 from IGMP snooping static member ports for group 239.1.1.1 on default
VLAN:
DES-3200-28P:admin#config igmp_snooping static_group vlan default 239.1.1.1
delete 9-10
Command: create igmp_snooping static_group vlan default 239.1.1.1 delete 9-10
Success.
DES-3200-28P:admin#
30-12 show igmp_snooping static_group
Description
This command is used to display the IGMP snooping multicast group static members.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan - Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Specify the multicast group IP address.