D-Link X-STACK DES-3200 SERIES - Page 283

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
279
30-16 show igmp_snooping
Description
This command is used to display the current IGMP snooping configuration on the Switch.
Format
show igmp_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view the IGMP snooping
configuration.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view the IGMP snooping
configuration.
<vlanid_list> - Enter the VLAN ID list here.
If the VLAN is not specified, the system will display all current IGMP snooping configurations.
Restrictions
None.
Example
To show IGMP snooping: