D-Link X-STACK DES-3200 SERIES - Page 319

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
315
vlan_name - Specify the name of the VLAN to which the blocked MAC address belongs.
<vlan_name> - Enter the VLAN name used.
mac_address - Specify the MAC address of the entry or the blocked MAC address.
<macaddr> - Enter the MAC address of the entry or the blocked MAC address.
Restrictions
None.
Example
To show the IMPB entries that are blocked:
DES-3200-28P:admin#show address_binding blocked all
Command: show address_binding blocked all
VID VLAN Name MAC Address Port
---- -------------------------------- ----------------- ----
1 default 00-0C-6E-AA-B9-C0 1
Total Entries : 1
DES-3200-28P:admin#
31-8 show address_binding ip_mac
Description
This command is used to display the IMPB entries.
Format
show address_binding ip_mac [all | ipaddress <ipaddr> mac_address <macaddr>]
Parameters
all - Specify that all the IP addresses to be displayed.
ipaddress - Specify the learned IP address of the entry in the database.
<ipaddr> - Enter the learned IP address.
mac_address - (Optional) Specify the MAC address of the entry in the database.
<macaddr> - Enter the MAC address here.
Restrictions
None.
Example
To show IMPB entries: