D-Link X-STACK DES-3200 SERIES - Page 321

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
317
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable DHCP IPv4 snooping mode:
DES-3200-28P:admin#enable address_binding dhcp_snoop
Command: enable address_binding dhcp_snoop
Success.
DES-3200-28P:admin#
31-10 disable address_binding dhcp_snoop
Description
This command is used to disable DHCP snooping mode. When the DHCP snooping function is
disabled, all of the auto-learned binding entries will be removed.
Format
disable address_binding dhcp_snoop
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable DHCP IPv4 snooping mode:
DES-3200-28P:admin#disable address_binding dhcp_snoop
Command: disable address_binding dhcp_snoop
Success.
DES-3200-28P:admin#