D-Link X-STACK DES-3200 SERIES - Page 334

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
330
Format
delete ipv6route [default] [<ipif_name 12> <ipv6addr> | <ipv6addr> | all]
Parameters
default - Specify the default route.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
<ipv6addr> - Specify the next hop address for the default route.
<ipv6addr> - Specify the next hop address for the default route.
all - Specify that all static created routes will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Delete an IPv6 static route:
DES-3200-28P:admin#delete ipv6route default System 3FFC::1
Command: delete ipv6route default System 3FFC::1
Success.
DES-3200-28P:admin#
33-3 show ipv6route
Description
This command is used to display IPv6 routes.
Format
show ipv6route
Parameters
None.
Restrictions
None.
Example
Show all the IPv6 routes: