D-Link X-STACK DES-3200 SERIES - Page 350

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
346
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable LLDP:
DES-3200-28P:admin#enable lldp
Command: enable lldp
Success.
DES-3200-28P:admin#
37-2 disable lldp
Description
This command is used to stop sending and receiving of LLDP advertisement packet.
Format
disable lldp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable LLDP:
DES-3200-28P:admin#disable lldp
Command: disable lldp
Success.
DES-3200-28P:admin#
37-3 config lldp
Description
This command is used to change the packet transmission interval.