xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
351
To enable ports 1-2 for manage address entry:
DES-3200-28P:admin#config lldp ports 1-2 mgt_addr ipv4 10.90.90.90 enable
Command: config lldp ports 1-2 mgt_addr ipv4 10.90.90.90 enable
Success.
To configure exclude the system name TLV from the outbound LLDP advertisements for all ports:
DES-3200-28P:admin#config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
To configure exclude the vlan nameTLV from the outbound LLDP advertisements for all ports:
DES-3200-28P:admin#config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements
for all ports:
DES-3200-28P:admin#config lldp ports all dot1_tlv_protocol_vid vlanid 1-3
enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DES-3200-28P:admin#config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
To configure exclude the protocol identity TLV from the outbound LLDP advertisements for all
ports:
To Next Page
Loading...
