D-Link X-STACK DES-3200 SERIES - Page 375

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
371
39-4 config mac_notification ports
Description
This command is used to configure the port’s MAC address table notification status settings.
Format
config mac_notification ports [<portlist> | all] [enable | disable]
Parameters
<portlist> - Enter a list of ports used for the configuration here.
all - Specify that all the ports will be used for this configuration.
enable - Enable the port’s MAC address table notification.
disable - Disable the port’s MAC address table notification.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable 7th port’s mac address table notification:
DES-3200-28P:admin#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DES-3200-28P:admin#
39-5 show mac_notification
Description
This command is used to display the Switch’s Mac address table notification global settings.
Format
show mac_notification
Parameters
None.
Restrictions
None.