D-Link X-STACK DES-3200 SERIES - Page 379

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
375
Example
To enable the MAC-based Access Control global state:
DES-3200-28P:admin#enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DES-3200-28P:admin#
40-2 disable mac_based_access_control
Description
This command is used to disable MAC-based Access Control.
Format
disable mac_based_access_control
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the MAC-based Access Control global state:
DES-3200-28P:admin#disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DES-3200-28P:admin#
40-3 config mac_based_access_control password
Description
This command is used to configure the RADIUS authentication password for MAC-based Access
Control.
Format
config mac_based_access_control password <passwd 16>