D-Link X-STACK DES-3200 SERIES - Page 389

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
385
40-14 show mac_based_access_control
Description
This command is used to display the MAC-based Access Control setting.
Format
show mac_based_access_control {ports {<portlist>}}
Parameters
ports – (Optional) Displays the MAC-based Access Control settings for a specific port or range of
ports.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If no parameter is specified, the global MAC-based Access Control settings will be displayed.
Restrictions
None.
Example
To show the MAC-based Access Control port configuration for ports 1 to 4:
DES-3200-28P:admin#show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State Aging Time Block Time Auth Mode Max User
(min) (sec)
----- -------- ---------- --------- ---------- --------
1 Disabled 1440 300 Host-based 128
2 Disabled 1440 300 Host-based 128
3 Disabled 1440 300 Host-based 128
4 Disabled 1440 300 Host-based 128
DES-3200-28P:admin#
40-15 show mac_based_access_control_local
Description
This command is used to display the MAC-based Access Control local database entry(s).
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
mac - (Optional) Displays MAC-based Access Control local database entries for a specific MAC