D-Link X-STACK DES-3200 SERIES - Page 424

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
420
DES-3200-28P:admin#show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VLAN Name VLAN ID Multicast Group Profiles
------------------------------- ------- ---------------------------------
mv1 2 test
DES-3200-28P:admin#
45-9 delete igmp_snooping multicast_vlan
Description
This command is used to delete an IGMP snooping multicast VLAN.
Format
delete igmp_snooping multicast_vlan <vlan_name 32>
Parameters
multicast_vlan - The name of the multicast VLAN to be deleted.
<vlan_name 32> -Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IGMP snooping multicast VLAN called “v1”:
DES-3200-28P:admin#delete igmp_snooping multicast_vlan v1
Command: delete igmp_snooping multicat_vlan v1
Success.
DES-3200-28P:admin#
45-10 enable igmp_snooping multicast_vlan
Description
This command is used to control the status of the multicast VLAN function.
Format
enable igmp_snooping multicast_vlan