D-Link X-STACK DES-3200 SERIES - Page 429

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
425
DES-3200-28P:admin#enable stp
Command: enable stp
Success.
DES-3200-28P:admin#
46-2 disable stp
Description
This command is used to disable STP globally.
Format
disable stp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable STP:
DES-3200-28P:admin#disable stp
Command: disable stp
Success.
DES-3200-28P:admin#
46-3 config stp
Description
This command is used to configure the bridge parameters global settings.
Format
config stp {maxage <value 6-40> | maxhops <value 6-40> | hellotime <value 1-2> |
forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu [enable | disable] |
nni_bpdu_addr [dot1d | dot1ad]}
Parameters
maxage - (Optional) Used to determine if a BPDU is valid. The default value is 20.