D-Link X-STACK DES-3200 SERIES - Page 442

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
438
47-2 config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB
entry.
Format
config nlb unicast_fdb <macaddr>[add|delete]<portlist>
Parameters
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be configured.
add - Specify to add the ports.
delete - Specify to delete the ports.
<portlist> - Specify a list of forwarding ports to be added or removed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure NLB unicast FDB entry, for the product that support the VLAN information on the
unicast forwarding:
DES-3200-28P:admin#config nlb unicast_fdb 02-bf-01-01-01-01 add 1-5
Command: config nlb unicast_fdb 02-BF-01-01-01-01 add 1-5
Success.
DES-3200-28P:admin#
47-3 delete nlb unicast_fdb
Description
This command is used to delete the NLB unicast FDB entry.
Format
delete nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.