D-Link X-STACK DES-3200 SERIES - Page 477

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
473
Parameters
<portlist> - (Optional) Specify a list of ports to be displayed.
If no parameter specified, the system will display the status for all ports.
Restrictions
None.
Example
To display PoE port:
DES-3200-28P:admin#show poe ports 1-6
Command: show poe ports 1-6
Port State Priority Power Limit(mW) Time Range
Class Power(mW) Voltage(decivolt) Current(mA)
Status
===============================================================================
1 Enabled Low 16200(Class 0)
0 0 0 0
OFF : Interim state during line detection
2 Enabled Low 16200(Class 0)
0 0 0 0
OFF : Interim state during line detection
3 Enabled Low 16200(Class 0)
0 0 0 0
OFF : Interim state during line detection
4 Enabled Low 16200(Class 0)
0 0 0 0
OFF : Interim state during line detection
5 Enabled Low 16200(Class 0)
0 0 0 0
OFF : Interim state during line detection
6 Enabled Low 16200(Class 0)
0 0 0 0
OFF : Interim state during line detection
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh