D-Link X-STACK DES-3200 SERIES - Page 480

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
476
Parameters
None.
Restrictions
None.
Example
To display PPPoE circuit ID insertion status:
DES-3200-28P:admin#show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Global PPPoE State: Enabled
DES-3200-28P:admin#
54-4 show pppoe circuit_id_insertion ports
Description
This command is used to display Switch’s port PPPoE Circuit ID insertion configuration.
Format
show pppoe circuit_id_insertion ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a list of ports to be displayed.
Restrictions
None.
Example
To display port 2-5 PPPoE circuit ID insertion configuration: