D-Link X-STACK DES-3200 SERIES - Page 513

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
509
Example
To configure CPU protection:
DES-3200-28P:admin#config safeguard_engine state enable utilization rising 50
falling 30 trap_log enable
Command: config safeguard_engine state enable utilization rising 50 falling 30
trap_log enable
Success.
DES-3200-28P:admin#
58-2 show safeguard_engine
Description
This command is used to show safeguard engine information.
Format
show safeguard_engine
Parameters
None.
Restrictions
None.
Example
To show safeguard_engine information:
DES-3200-28P:admin#show safeguard_engine
Command: show safeguard_engine
Safeguard Engine State : Disabled
Safeguard Engine Current Status : Normal Mode
=======================================================
CPU Utilization Information:
Rising Threshold : 30%
Falling Threshold : 20%
Trap/Log State : Disabled
Mode : Fuzzy
DES-3200-28P:admin#
Note: Safeguard engine current status has two modes: exhausted and normal mode.