D-Link X-STACK DES-3200 SERIES - Page 551

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
547
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP:
DES-3200-28P:admin#disable snmp
Command: disable snmp
Success.
DES-3200-28P:admin#
63-20 config snmp system_name
Description
This command is used to configure the name for the Switch.
Format
config snmp system_name {<sw_name>}
Parameters
system_name - A maximum of 128 characters is allowed. And NULL string is accepted.
<sw_name> - (Optional) Enter the system name used here.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the Switch name for “DES-32xx L2 Switch”:
DES-3200-28P:admin#config snmp system_name DES-32xx L2 Switch
Command: config snmp system_name DES-32xx L2 Switch
Success.
DES-3200-28P:admin#
63-21 config snmp system_location
Description
This command is used to enter a description of the location of the Switch.