D-Link X-STACK DES-3200 SERIES - Page 554

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
550
DES-3200-28P:admin#disable snmp traps
Command: disable snmp traps
Success.
DES-3200-28P:admin#
63-25 enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP authentication trap support:
DES-3200-28P:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DES-3200-28P:admin#
63-26 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.