D-Link X-STACK DES-3200 SERIES - Page 565

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
561
DES-3200-28P:admin#show sim neighbor
Command: show sim neighbor
Neighbor Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DES-3200-28P:admin#
64-4 reconfig
Description
This command is used to re-telnet to member.
Format
reconfig {member_id <value 1-32> | exit}
Parameters
member_id - (Optional) Specify the serial number of the member.
<value 1-32> - Enter the serial number of the member here.
exit - (Optional) Specify to exit from the telnet session.
Restrictions
Only Administrator-level users can issue this command.
Example
To re-telnet to member:
DES-3200-28P:admin#reconfig member_id 1
Command: reconfig member_id 1
DES-3200-28P:admin#
Login:
64-5 config sim_group
Description
This command is used to configure group information.