D-Link X-STACK DES-3200 SERIES - Page 568

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
564
DES-3200-28P:admin#config sim dp_interval 30
Command: config sim dp_interval 30
Success.
DES-3200-28P:admin#
To change the hold time of discovery protocol:
DES-3200-28P:admin#config sim hold_time 200
Command: config sim hold_time 200
Success.
DES-3200-28P:admin#
64-7 download sim_ms
Description
This command is used to download firmware or configuration to indicated device.
Format
download sim_ms [firmware_from_tftp | configuration_from_tftp] {<ipaddr>
<path_filename> {[members <mslist 1-32> | all]}}
Parameters
firmware_from_tftp - Specify that the firmware will be downloaded from the TFTP server.
configuration_from_tftp - Specify that the configuration will be downloaded from the TFTP
server.
<ipaddr> - (Optional) Specify the IP address of the TFTP server.
<path_filename> - (Optional) Specify the file path of the firmware or configuration in the TFTP
server.
members - (Optional) Specify a range of members who can download this firmware or
configuration.
<mslist 1-32> - Enter the member list used here. This value must be between 1 and 32.
all - (Optional) Specify that all members will be used.
Restrictions
Only Administrator-level users can issue this command.
Example
To download configuration: