D-Link X-STACK DES-3200 SERIES - Page 587

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
583
67-2 show system_severity
Description
This command is used to display the severity level controls for the system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To show severity level control for system:
DES-3200-28P:admin#show system_severity
Command: show system_severity
System Severity Trap : warning(4)
System Severity Log : information(6)
DES-3200-28P:admin#