D-Link X-STACK DES-3200 SERIES - Page 602

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
598
Format
config time <date ddmthyyyy> <time hh:mm:ss>
Parameters
<date ddmthyyyy> - Specify the system clock date. An example would look like this:
'30jun2010'.
<time hh:mm:ss> - Specify the system clock time. An example would look like this: '12:00:00'.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure time:
DES-3200-28P:admin#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DES-3200-28P:admin#
70-6 config time_zone
Description
This command is used to configure time zone of the device.
Format
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
Parameters
operator - (Optional) Specify the operator of time zone.
[+ | -] - Specify that time should be added or subtracted to or from the GMT.
hour - (Optional) Specify the hour of time zone.
<gmt_hour 0-13> - Enter the hour value of the time zone here. This value must be between 0
and 13.
min - (Optional) Specify the minute of time zone.
<minute 0-59> - Enter the minute value of the time zone here. This value must be between 0
and 59.
Restrictions
Only Administrator and Operator-level users can issue this command.