D-Link X-STACK DES-3200 SERIES - Page 621

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
617
Parameters
default - Deletes an IP default route (0.0.0.0/0).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IP default route:
DES-3200-28P:admin#delete iproute default 10.1.1.254
Command: delete iproute default 10.1.1.254
Success.
DES-3200-28P:admin#
75-3 show iproute
Description
This command is used to display the Switch’s current IP routing table.
Format
show iproute {<network_address>} {static}
Parameters
<network_address> - (Optional) Specify the destination network address of the route to be
displayed.
static - (Optional) Specify to display only static routes. One static route may be active or inactive.
Restrictions
None.
Example
To display the contents of the IP routing table: