D-Link X-STACK DES-3200 SERIES - Page 85

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
81
Parameters
encrypt - (Optional) Specify the password form.
plain_text - Specify the password in plain text form.
sha_1 - Specify the password in SHA-1 encrypted form.
<password> - (Optional) The password for promoting the privilege level. The length for a
password in plain-text form and SHA-1 encrypted form are different.
plain-text: Passwords can be from a minimum of 0 to a maximum of 15 characters.
SHA-1: The length of Encrypted passwords is fixed to 35 bytes longand the password is case-
sensitive.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the administrator password:
DES-3200-28P:admin#config admin local_enable
Command: config admin local_ebable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-3200-28P:admin#