Information Section
Maintenance
The Maintenance Section is a guide to equipment
care. The illustrated, step-by-step instructions are
grouped by servicing intervals. Items without spe-
cific intervals are listed under ÒWhen RequiredÓ top-
ics. Items in the ÒMaintenance IntervalsÓ chart are
referenced to detailed instructions that follow.
Maintenance Intervals
Use the service hour meter to determine servicing
intervals. Calendar intervals shown (daily, weekly,
monthly, etc.) can be used instead of service hour
meter intervals if they provide more convenient ser-
vicing schedules and approximate the indicated
service hour meter reading. Recommended service
should always be performed at the interval that
occurs first.
Under extremely severe, dusty or wet operating
conditions, more frequent lubrication than is speci-
fied in the ÒMaintenance IntervalsÓ chart might be
necessary.
Perform service on items at multiples of the original
requirement. For example, at ÒEvery 500 Service
Hours or 3 MonthsÓ, also service those items listed
under ÒEvery 250 Service Hours or MonthlyÓ and
ÒEvery 10 Service Hours or DailyÓ.
Environment Management
Note that DAEWOO INDUSTRIAL VEHICLE DIVI-
SION is ISO 14001 certified which is harmonized
with ISO 9001. Periodic ENVIRONMENTAL
AUDITS & ENVIRONMENTAL PERFORMANCE
EVALUATIONS have been made by internal and
external inspection entities. LIFE-CYCLE ANALY-
SIS has also been made through out the total prod-
uct life. ENVIRONMENT MANAGEMENT SYSTEM
includes DESIGN FOR ENVIRONMENT from the
initial stage of the design.
ENVIRONMENT MANAGEMENT SYSTEM consid-
ers environmental laws & regulations, reduction or
elimination of resource consumption as well as
environmental emission or pollution from industrial
activities, energy saving, environment-friendly prod-
uct design(lower noise, vibration, emission, smoke,
heavy metal free, ozone depleting substance free,
etc.), recycling, material cost reduction, and even
environmentally oriented education for the employ-
ee.
- 3 -
To Next Page
Loading...
