- 104 -
Maintenance Section
5. Remove the blocks from under the carriage.
Lower the carriage.
Attachment & Mast - Inspect,
Lubricate
1. Operate the lift, tilt and attachment controls.
Listen for unusual noises. These may indicate a
need for repair.
2. Check for loose bolts and nuts on the carriage.
Remove any debris from the carriage and mast.
3. Check the forks and attachments for free opera-
tion and damage. Have repairs made if necessary.
4. Brush a film of oil on all links of the chain.
5. Raise and lower the carriage a few times to
work lubricant into the chain links.
NOTICE
Lubricate chains more frequently than normal in
applications where the lift truck is operating in a
atmosphere which could cause corrosion of
components or when lift truck must work in
rapid lift cycles.
6. Check the chain anchors and individual links for
wear, loose pins or cracked leaves.
IA3M4042
IA3M4041
To Next Page
Loading...
