- 95 -
Maintenance Section
3. Start and run the engine to stabilize the coolant
level in the filler neck. If low add coolant until it
reaches the top of the filler neck. Install the radia-
tor cap. Observe coolant level in the expansion
bottle. If necessary, add coolant to bring the
coolant to the appropriate line on the expansion
bottle.
4. Stop the engine.
5. Inspect the cooling system for leaks, hose
cracks or loose connections.
Pressure air can cause personal injury.
When using pressure air for cleaning, wear a
protective face shield, protective clothing and
protective shoes.
Maximum air pressure must be less than 205
kPa (30 psi) for cleaning purposes.
6. Blow any dust and lint from the radiator fins.
Air Cleaner Indicator - Check
Checking Service Indicator
( Diesel Engine )
( Gasoline and LP-Gas Engine )
1. Observe the air cleaner service indicator.
2. Service the air cleaner when the RED band in
the service indicator, lock in the visible position.
See topic, Ò Air Cleaner Ó in Ò When Required Ó.
NOTE : Service the element more frequently, as
required, in servere dust or lint conditions. Also,
service it more frequently where the operator is
required to wear a respirator.
3. Close hood and seat assembly.
To Next Page
Loading...
