Daewoo D45S-2 - Inching & Brake Control Shaft - Lubricate; Horn and Lights (if Eqquiped) - Check; Overhead Guard - Inspect

- 113 -
Maintenance Section
Inching & Brake Control shaft -
Lubricate
1. Lubricate two fittings for the inching and brake
pedal control shaft.
Horn and Lights (If Equipped) -
Check
1. Press horn button, to determine if horn is opera-
tional.
2. Check and replace all defective gauges.
3. Check all lights such as warning, directional,
backup, driving and flood lights for correct opera-
tion. Replace all burned out bulbs. Have repairs
made if needed.
Overhead Guard - Inspect
1. Check tightness of overhead guard mounting
bolts at 80 N
¥
m (60 lb
¥
ft).
2. Check overhead guard for bent or cracked sec-
tions.Have repairs made if needed.
IA3M4064
IA3M4027
IA3M4065