- 96 -
Maintenance Section
Walk - Around Inspection -
Inspect
For maximum service life of the lift truck, make a
thorough walk-around inspection.
Look around and under the truck for such items as
loose or missing bolts, debris or dirt buildup, fuel,
oil or coolant leaks and cut gouged tires.
Have any repairs made and debris removed, as
needed.
1. Inspect the tires and wheels for cuts, gouges,
foreign objects, inflation pressure and loose or
missing bolts.
2. Inspect the mast and lift chains for wear, broken
links, pins and loose rollers.
3. Inspect the hydraulic system for leaks, worn
hoses or damaged lines.
4. Look for transmission and differential leaks on
the lift truck and on the ground.
5. Inspect the operatorÕs compartment for loose
items and cleanliness.
6. Inspect the instrument panel for broken gauges
and indicator lights.
7. Test the horn and other safety devices for prop-
er operation.
( Diesel Engine )
( LP-Gas Engine )
8. Inspect the cooling system for leaks, worn
hoses and debris buildup.
9. Inspect engine compartment for oil, coolant and
fuel leaks.
10. Inspect the forks.
•
Visually inspect forks for cracks, especially in
the heel section, around the mounting brackets,
and all weld areas.
•
Inspect for broken or jagged fork tips, bent or
twisted blades and shanks.
•
Make sure positioning lock is in place and work-
ing. Lock the forks in position before using the
truck. See Step 7 of “ Forks ” in “ Every 2000
Service Hours or 1 Year. ”
•
Remove all defective forks from service.
IA3M3019
IA3M4027
IA3M3022
IA3M4090
To Next Page
