Operation Section
- 44 -
Service Brake Pedal
Push DOWN on the brake pedal to
slow or stop the lift truck.
RELEASE the brake pedal to allow the
lift truck to move.
Accelerator Pedal
Push DOWN on the pedal to increase
engine rpm (speed).
RELEASE the pedal to decrease
engine rpm (speed).
Parking Brake Lever
Pull the lever BACK to engage the park-
ing brake.
Push the lever FORWARD to release
the parking brake.
Lift Control
NOTE : To prevent a sudden change of position of
the load, operater all lift, tilt and attachment con-
trols smoothly.
1. Lower Position - Push the lever
FORWARD smoothly to lower the load.
2. Hold Position - When the lever is
released it will return to the HOLD or
center position. Lifting or lowering
action will stop.
3. Lift Position - Pull the lever BACK
smoothly to lift the load.
IA3M3010
IA3M3011
IA3M3013
IA3M3014
To Next Page
Loading...
