Operation Section
- 48 -
11. Position the replacement tank so that the locat-
ing pin (dowel) is in place.
12. Clamp the tank securely.
13. Connect the fuel supply line.
14. Open the fuel valve by slowly turning the valve
counterclockwise. If the fuel valve is opened too
quickly, a back pressure check valve will shut off the
fuel supply. If this happens, close the fuel valve
completely. Wait five seconds and then open the
fuel valve very slowly.
15. Inspect the LP-Gas fuel lines and fittings with
a soap solution after filling the tank or when look-
ing for leaks.
IA0O025P
To Next Page
Loading...
