Operation Section
- 50 -
10. Inspect the engine compartment for oil, coolant
and fuel leaks.
11. Measure the engine crankcase oil level with the
dip stick. Maintain the oil level between the MAX.
and MIN., (or FULL and ADD) notches on the dip
stick.
12. Observe the engine coolant level in the coolant
recovery bottle. With the engine cold, maintain the
level to the COLD mark. If the recovery bottle is
empty, also fill the radiator at the top tank.
13. Observe the fuel level gauge after starting the
truck. Add fuel if necessary.
14. In case of LPG truck, if needed, change LPG
Fuel Tank as the procedure of changing LP-Gas
tanks in Refueling Section.
Personal injury may occur from accidents
caused by improper seat adjustment. Always
adjust the operator's seat before starting the lift
truck engine.
Seat adjustment must be done at the beginning
of each shift and when operators change.
15. To position the seat, PUSH the lever away from
the seat track and move the seat forward or back-
ward to a comfortable position.
To Next Page
Loading...
